RESANTA SAI-220
Short review
Selected in the rating
10
Best rating
welding machines
Manual arc welding - For summer cottages - For home - For pipes - Inverter
Buy RESANTA SAI-220
Characteristics of RESANT SAI-220
Yandex.Market data
| Main characteristics | |
| Device type | welding inverter |
| Welding types | manual arc welding (MMA) |
| Welding current (MMA) | 10-220 A |
| Input voltage | 140-260V |
| Number of supply phases | 1 |
| Open circuit voltage | 80 in |
| Output current type | constant |
| Duration of inclusion at maximum current | 70 % |
| Electrode diameter | 5 mm |
| additional characteristics | |
| Anti-adhesion | there is |
| Hot start | there is |
| Degree of protection | IP21 |
| Weight | 5 Kg |
| Equipment | cable with electrode holder; cable with ground terminal |
Reviews about RESANTA SAI-220
Yandex.Market data
Advantages:
I liked the quality of welding ++++. The arc burns smoothly, ignites without problems. Used mainly electrodes MR-3 and OK-46. Also SSSI, I don't remember exactly which ones. I tried different ones on nerzhe, norms. In general, only positive emotions.
Disadvantages:
The only negative is the short wires for the holder and ground. I connected them together on a twist with a solder and use it as a ground wire, and I bought a 4 meter cable for the holder. The clamp of the mass burnt out over time, replaced with a solid brass one. And the holder was surprised - did not expect that it would work for a long time. However, it works, does not burn.
Comment:
I got it about four years ago. I took 220 to have a large power reserve. Extension cord 100 meters - normal flight. Main electrodes, 3, 4 OK-46. I cut with 5th Mr-coy (there were no others at that moment at hand). I use it in construction, in the garage. I did not regret the choice, if I bought it now, I would buy the same one again.
Advantages:
An inexpensive welding machine, the weight is just ridiculous, even without studying to be a welder, you can cook without problems. We bought to work for welding a ground loop. I work as an electrician by training. I boil the contours with this machine. The seam is even, welds 20 mm reinforcement perfectly. I tried to cook the pallet protection on viburnum, everything is super, never burned through, although the welder is self-taught.
Disadvantages:
I don’t know if
Comment:
Excellent machine, cooks for 5+ I recommend to buy
Advantages:
Fast and quality welding
Comment:
Two years ago, my car broke down, the bottom rotted, but there was no welding machine and I decided to order it. I welded very quickly, in 3 days, there were no problems with the voltage. I liked the quality of welding.
Advantages:
Continuous work for a long time. Excellent ignition of the electrode. Good weld seam
Disadvantages:
no
Comment:
I got this unit for home. All that needed to be brewed or grabbed was brewed and grabbed long ago. In general, it is worth taking and worth the money.
Advantages:
Light weight and dimensions are not large, the seam is obtained even with low voltage in the network.
Disadvantages:
I haven't found it yet.
Comment:
My previous inverter burned out and I had to buy a new one, after reading reviews on the Internet I bought it and did not regret it, now I cook and I am glad that it happened and I didn’t know that there are such cool welding machines.
Advantages:
Lightweight, small, looks beautiful, powerful - I did not even set it to full when working
Disadvantages:
while everything suits
Comment:
I have little experience with the welding machine, but still I liked the model, weld and that's it, the quality of the seam depends only on you. The device is light, sparks do not fly in different directions. It is a good model for home, it is compact - it has been removed from the case and takes up little space, plus there is a belt on the device itself.
Advantages:
Excellent value for money and quality. Lightweight, compact.
Disadvantages:
Lack of storage case.
Comment:
We have been using this device for more than four years, the device does not overheat, it pulls 5ku electrodes, but I cook 3 or 4 myself. The current mode control is adequate. Great helper for home and work. How many they have already cooked and cannot remember. Completely satisfied with the purchase, I advise everyone.
Advantages:
Compact, powerful, quite suitable for a beginner
Disadvantages:
Short cables
Comment:
Was taken for household needs and training. For a beginner without experience (knowing only the theory), it was not worthwhile to figure it out and
Advantages:
I didn’t pick up a hold for 8 years, bought this device for construction yesterday and decided to try it in the garage. I found the old electrode 3, caught the arc the first time and welded 2 pieces of 45 angle with an even seam. I used to cook on VDM from the post, this one lays down metal much better.
Disadvantages:
Short cables + and -
Comment:
Great thing, worth the money.
Advantages:
Price-quality ratio. It never happened to overheat, so that the welding would turn off.
Disadvantages:
1 Too light rotation of the amperage adjustment knob, everything has gotten off a bit 2 The scale on the adjustment knob to adjust the amperage is not correctly applied 3 Fan material is too weak: a small leaf of grass has fallen and it scattered into small parts 4 Unsuccessful design of the ground wire. but these are all little things. excellent machine. I advise everyone.
Comment:
in operation for more than 3 years. no complaints
